Skip to main content

Solar PV

Module: insight (always on) | Role: Any member | Licence: Free+

Model: Deterministic sinusoidal generation curve based on solar angle, with stochastic weather noise and per-house variation.

Array Size Presets​

RegionDefault (Medium)SmallLargeSource
UK3.5 kW2 kW5.5 kWCode default; MCS data shows 4 kWp typical UK installation
US7 kW4 kW11 kWSEIA/Wood Mackenzie residential market data
AU6.6 kWp——CER (Clean Energy Regulator) STC data; inverter-limited sweet spot

Note: The UK code default (3.5 kW) is slightly below the MCS market average (4 kWp) to represent a conservative installed base including older systems.

Seasonal Capacity Factors​

Internal simulation capacity factors (fraction of peak output on a typical day):

SeasonFactorDescription
Summer85%Long days, high sun angle, clear skies
Spring65%Moderate days, variable weather
Autumn55%Shorter days, more cloud cover
Winter30%Short days, low sun angle

For reference, real-world annual capacity factors by region:

RegionSummerWinterAnnual AverageSource
UK15-18%5-8%10-12%Sheffield Solar / PV_Live
US Southwest25-30%15-20%20-25%NREL PVWatts
US Northeast18-22%8-12%14-17%NREL PVWatts
Australia12-16% (winter)22-28% (summer)16-20%BOM solar exposure maps

Generation Profile​

  • Sinusoidal curve based on solar angle for the season
  • Weather noise: Normal distribution, sigma=15%
  • Per-house variation: sigma=20%
  • Output is negative (generation/export reduces net consumption)

Flexibility Modes​

  • unmanaged (FIXED): Full output, no curtailment
  • passive (MANAGED): Curtailable — set curtail_start, curtail_end, curtail_percent (0-100)

Limitations​

  • Array sizes are rapidly increasing; presets should be reviewed annually
  • Actual generation depends on orientation, tilt, shading, and local irradiance (not modeled)
  • Does not model battery-paired solar differently from standalone
  • Capacity factors are location-specific; defaults are regional averages
  • Does not model degradation, soiling, or inverter clipping